Grass Seed Rate: New Lawn vs Overseeding

How much seed does a 5,000 sq ft tall fescue lawn need? At K-State’s rates, the answer runs from 15 lb to 40 lb. The spread depends on one question: are you seeding bare soil or thickening a lawn that already has grass?

Quick Answer

For a new lawn on bare soil, Penn State and the University of Maryland recommend 6 to 8 lb of tall fescue or 2 to 3 lb of Kentucky bluegrass per 1,000 sq ft. To overseed a thin lawn, K-State says to use about half: 3 to 4 lb of tall fescue or about 2 lb of bluegrass.

How Much Grass Seed Per 1,000 Sq Ft Does a New Lawn Need?

Penn State Extension and University of Maryland Extension (UMD) put a new lawn at 6 to 8 lb of tall fescue or 2 to 3 lb of Kentucky bluegrass per 1,000 sq ft. Other common species range from about 1 lb to 8 lb, depending on the species and the source.

Penn State adds two useful details. Its bluegrass rate of 2 to 3 lb is for pure stands and rises to 3 to 4 lb in blends. Its rates for perennial ryegrass and fine fescue, 4 to 5 lb each, are for 100 percent stands. The Penn State page dates from 1997, so compare it with the newer pages in the table.

New-lawn seeding rates for other species (lb of seed per 1,000 sq ft)
Species Penn State UMD K-State turf page Oklahoma State (PLS)
Perennial ryegrass 4 to 5 Not given 3 to 5 4 to 8
Fine fescue 4 to 5 4 to 6 3 to 5 Not given
Creeping bentgrass About 1 Not given Not given Not given
Bermudagrass Not given 1 Not given 1 to 2
Zoysiagrass Not given 1 Not given 1 (Sunrise zoysia)
Buffalograss Not given Not given 1 to 2.5 Not given

Oklahoma State lists its rates as pure live seed (PLS), a different basis from the other columns. The PLS section further down shows how to turn a PLS rate into pounds of seed to spread.

How Much Less Seed Does Overseeding Take?

Overseeding a thin lawn takes about half the new-lawn rate, according to K-State Research and Extension in Johnson County, Kansas. Its advice is to overseed at “half the seeding rate that is used for new lawns on bare soil.” For tall fescue, that means 3 to 4 lb per 1,000 sq ft instead of 6 to 8.

Two other Midwest sources give their own overseeding numbers. The University of Nebraska-Lincoln turfgrass program lists 3 to 4 lb of tall fescue and about 2 lb of Kentucky bluegrass. Illinois Extension lists 3 to 5 lb for fescue and ryegrass and 1.5 lb for bluegrass. The Grass Seed Calculator has separate new-lawn and overseed settings, so you can see both totals for your own lawn area.

New-lawn vs overseeding rates where a source gives both (lb per 1,000 sq ft)
Source Tall fescue, new Tall fescue, overseed Bluegrass, new Bluegrass, overseed
K-State, Johnson County 6 to 8 3 to 4 3 to 4 About 2
Nebraska 5 to 8 3 to 4 1 to 3 About 2
Illinois (fescue and ryegrass grouped) 5 to 10 3 to 5 3 1.5

The half rule is K-State’s alone. Nebraska’s bluegrass overseeding rate of about 2 lb is more than half of its 1 to 3 lb new-lawn range. Treat the half rule as a starting point, not a law.

Worked Example: A 5,000 Sq Ft Tall Fescue Lawn

A 5,000 sq ft tall fescue lawn needs 35 lb of seed as a new lawn and 20 lb to overseed at the calculator’s built-in rates. K-State’s ranges give 30 to 40 lb and 15 to 20 lb for the same yard.

  1. Count the 1,000 sq ft units. 5,000 / 1,000 = 5 units.
  2. New lawn at the calculator’s rate. The tool uses 7 lb per 1,000 sq ft for tall fescue: 5 x 7 = 35 lb.
  3. Overseeding at the calculator’s rate. The tool’s overseed setting uses 4 lb: 5 x 4 = 20 lb.
  4. Check against K-State. New lawn: 5 x 6 = 30 lb up to 5 x 8 = 40 lb. Overseeding: 5 x 3 = 15 lb up to 5 x 4 = 20 lb.

The calculator’s 7 lb falls inside K-State’s 6 to 8 lb range. Its 4 lb matches the top of K-State’s 3 to 4 lb overseeding range. Those tool figures are planning defaults, not extension recommendations.

Kentucky bluegrass works the same way. A 2,000 sq ft yard at K-State’s 3 to 4 lb needs 2 x 3 = 6 lb to 2 x 4 = 8 lb as a new lawn. At about 2 lb for overseeding, it needs about 2 x 2 = 4 lb.

Why Do Extension Services Disagree on Seeding Rates?

Extension rates differ by state, by page date and by how the rate is measured. So one species can carry several ranges. Perennial ryegrass shows the widest split. UMass Extension gives 7 to 9 lb, Penn State gives 4 to 5 lb, and K-State’s turf establishment page gives 3 to 5 lb.

Kentucky bluegrass varies too. UMass and NC State Extension say 1 to 2 lb, and Penn State and UMD say 2 to 3 lb. Illinois says 3 lb, and K-State in Johnson County says 3 to 4 lb.

Seed count per pound helps explain why bluegrass rates sit so low. UMass counts about 2,177,000 Kentucky bluegrass seeds per pound but only 227,000 for tall fescue, about one-tenth as many. K-State’s turf page aims for at least 10 to 20 seeds per square inch. A 1,000 sq ft area holds 144,000 square inches. So 8 lb of tall fescue gives 8 x 227,000 / 144,000, or about 12.6 seeds per square inch.

UMass also suggests raising rates about 50 percent for poor conditions, and it puts seedling survival at 50 to 95 percent.

New-lawn seeding ranges by source Tall fescue: Penn State 6 to 8 lb, UMD 6 to 8 lb, K-State Johnson County 6 to 8 lb, Nebraska 5 to 8 lb, Oklahoma State 4 to 6 lb pure live seed. Kentucky bluegrass: Penn State 2 to 3 lb for pure stands, UMD 2 to 3 lb, K-State Johnson County 3 to 4 lb, Nebraska 1 to 3 lb, Oklahoma State 2 lb pure live seed. All per 1,000 square feet. New-lawn seeding ranges by source (lb per 1,000 sq ft) Tall fescue Penn State 6 to 8 UMD 6 to 8 K-State (Johnson Co.) 6 to 8 Nebraska 5 to 8 Oklahoma State (PLS) 4 to 6 Kentucky bluegrass Penn State (pure stand) 2 to 3 UMD 2 to 3 K-State (Johnson Co.) 3 to 4 Nebraska 1 to 3 Oklahoma State (PLS) 2 0 2 4 6 8 10 Pounds of seed per 1,000 sq ft (Oklahoma State figures are pure live seed)
Tall fescue ranges cluster at 6 to 8 lb; bluegrass ranges spread from 1 to 4 lb.

How Does Pure Live Seed Change the Amount You Spread?

Pure live seed (PLS) counts only seed that is pure and able to germinate. So you spread more seed than the PLS rate. Oklahoma State divides the PLS rate by purity times germination to find the amount to sow.

Oklahoma State’s own example uses a PLS rate of 2 lb, 90 percent purity and 75 percent germination. The math is 0.90 x 0.75 = 0.675, then 2 / 0.675 = 2.96 lb of seed to sow.

Clemson’s Home and Garden Information Center advises buying seed with at least 90 percent purity and 85 percent germination. At those minimums, the same 2 lb PLS rate becomes 2 / (0.90 x 0.85) = 2 / 0.765 = 2.61 lb.

Coated seed is a second adjustment. NC State’s Extension Gardener Handbook says to double its 1 to 2 lb bermudagrass rate when the seed is coated. That makes it 2 to 4 lb. Each adjustment fits its own case: the PLS math applies to rates stated as PLS, and the doubling is NC State’s rule for coated bermudagrass seed.

Bare Soil or Thin Lawn: Which Rate Fits Your Yard?

Use the full new-lawn rate on bare soil and about half that rate on a thin lawn that still has grass. Illinois Extension says to use the new-lawn rate in bare spots.

A patchy lawn can need both rates. Measure the bare patches and the thin areas separately, work out the seed for each, and add the two amounts.

These overseeding figures are for cool-season grasses such as tall fescue and Kentucky bluegrass. The sources reviewed here give no rate for thickening a thin bermudagrass, zoysia or buffalograss lawn. Oklahoma State does give a bermudagrass overseeding rate. It means winter overseeding with perennial ryegrass at 10 to 12 lb, a different practice.

Bare soil or thin lawn? A planning flow. Start with what is on the ground now. Bare soil, including a new lawn or bare patches, takes the full new-lawn rate per K-State and Illinois. A thin cool-season lawn with grass still growing takes about half the new rate, K-State’s rule. A bermudagrass lawn planned for winter ryegrass is a different practice described by Oklahoma State. Planning question: bare soil or thin lawn? What is on the ground now? Bare soil new lawn or bare patches Thin cool-season lawn grass still growing Bermudagrass lawn winter ryegrass planned Full new-lawn rate K-State and Illinois About half the new rate K-State’s overseeding rule A different practice per Oklahoma State Measure bare patches and thin areas separately, then add the two seed amounts.
Decide by what is on the ground, not by what you call the job.
Run Your Own Lawn Numbers

Enter your area, pick a species and choose new lawn or overseed in the grass seed calculator. Then compare the result with the range your state extension service gives.

FAQs About Grass Seed Rates

Can I use the overseeding rate on bare patches in my lawn?

No. Illinois Extension says to use the new-lawn rate in bare spots. K-State ties its half rate to overseeding an existing lawn, not to seeding bare soil.

Why is the Kentucky bluegrass rate so much lower than tall fescue?

Each bluegrass seed weighs far less. UMass Extension counts about 2,177,000 Kentucky bluegrass seeds per pound versus 227,000 for tall fescue, so a pound of bluegrass holds nearly ten times as many seeds.

How much seed do I need to overseed 5,000 square feet of tall fescue?

About 15 to 20 lb. K-State and Nebraska both give 3 to 4 lb per 1,000 square feet for overseeding tall fescue, and 5 x 3 = 15 while 5 x 4 = 20.

Should I add extra seed when growing conditions are poor?

UMass Extension suggests raising seeding rates about 50 percent for poor conditions. It also notes that seedling survival ranges from 50 to 95 percent, so not every seedling lasts.

What does pure live seed mean on a seeding rate?

It counts only seed that is pure and able to germinate. Oklahoma State divides the PLS rate by purity times germination, so 2 lb PLS at 90 and 75 percent means sowing 2.96 lb.

Does coated grass seed change how much I should spread?

Yes, for bermudagrass. NC State’s Extension Gardener Handbook says to double its 1 to 2 lb rate per 1,000 square feet when the seed is coated, which makes it 2 to 4 lb.

Can I overseed a thin bermudagrass lawn at half the new-lawn rate?

The sources reviewed here give no thickening rate for bermudagrass. Oklahoma State’s 10 to 12 lb perennial ryegrass figure is for winter overseeding of bermudagrass, which is a different practice.

Sources and Further Reading

References Used in This Article

Rates are extension guidance in pounds of seed per 1,000 sq ft and vary by state, species and seed lot. Check your own state extension service before you buy seed. Reviewed for accuracy by Prof. Dr. Khalil Mudassar, PhD. Last updated 2026-11-15.